Direct factory supply from JIMPOCHEM certified production facilities ensuring ultra-high purity, global regulatory compliance, and robust supply chain resilience.
Hydrofluoroether HFE-7200 (CAS numbers: 163702-05-4 for Ethyl Nonafluorobutyl Ether and 163702-06-5 for Ethyl Nonafluoroisobutyl Ether) represents the peak of modern fluorochemical innovation designed to replace ozone-depleting substances (ODS) and high Global Warming Potential (GWP) hydrofluorocarbons (HFCs). Composed of a mixture of two inseparable chemical isomers—ethyl nonafluorobutylether and ethyl nonafluoroisobutylether—HFE-7200 possesses exceptional chemical inertia, ultra-low surface tension, robust dielectric strength, and optimal thermal transport properties.
As industrial thermal footprints expand within high-density AI data centers and sub-nanometer semiconductor fabrication lines, HFE-7200 offers a zero Ozone Depletion Potential (ODP=0) and a low GWP (55), compliant with stringent international regulatory frameworks including the EU F-Gas Regulation, US EPA SNAP Program, and global REACH parameters.
| Performance Parameter | HFE-7200 (JIMPOCHEM Grade) | Legacy HFC-4310mee | PFC-5060 (Perfluorocarbon) | n-PB (n-Propyl Bromide) |
|---|---|---|---|---|
| Global Warming Potential (100-yr GWP) | 55 (Low Carbon Impact) | 1,640 (High Risk) | 9,000 (Severe GWP) | 15 (Toxic/Restricted) |
| Ozone Depletion Potential (ODP) | 0.00 | 0.00 | 0.00 | 0.02 - 0.10 (ODS) |
| Flammability / Flash Point | None (ASTM D93) | None | None | 22 °C (Highly Flammable) |
| Dielectric Strength (kV) | > 28 kV | ~ 22 kV | ~ 25 kV | Conductive / Unsuitable |
| Surface Tension (dynes/cm @ 25°C) | 13.6 (Superior Wetting) | 14.1 | 12.0 | 25.9 (High Tension) |
| Occupational Exposure Limit (8-hr TWA) | 200 ppm | 200 ppm | 750 ppm | 0.1 ppm (Highly Toxic) |
HFE-7200 serves as a mission-critical thermal vector and high-solvency extraction fluid across next-generation technological ecosystems.
With TDP (Thermal Design Power) for high-performance GPUs exceeding 1000W per chip, traditional air cooling and single-phase water loops face physical limits. HFE-7200 functions as a two-phase dielectric fluid. Operating at its 76°C boiling point, it absorbs latent heat via phase change, delivering a 40% reduction in data center power usage effectiveness (PUE < 1.05).
In sub-3nm lithography and EUV wafer manufacturing, microscopic particle contamination triggers catastrophic yield loss. HFE-7200's ultra-low surface tension (13.6 dynes/cm) penetrates deep high-aspect-ratio trenches, removing sub-micron particles and fluoropolymer residue without etching sensitive metals or dielectric layers.
Vapor Phase Soldering (VPS) requires inert heat-transfer media capable of maintaining precise condensation temperatures without thermal degradation. HFE-7200 offers absolute temperature stabilization at 76°C, eliminating thermal shock and void formation in critical avionics and satellite PCB assemblies.
Electric vehicle battery architectures utilize HFE-7200 in direct immersion cold plates. In extreme fast-charging or thermal overload scenarios, HFE-7200 rapidly suppresses localized hot spots, preventing catastrophic thermal runaway propagation across adjacent lithium-ion cells.
Medical implants, surgical tools, and high-precision optical lenses demand non-toxic, spot-free solvent drying. HFE-7200 leaves zero non-volatile residue (NVR < 1 ppm), quickly displacing moisture and fluorinated lubricants without compromising polymer substrates.
Due to its structural compatibility, HFE-7200 serves as an ideal diluent and carrier fluid for perfluoropolyether (PFPE) lubricants, silicone anti-fingerprint coatings, and fluoropolymers applied onto consumer electronics displays and micro-actuators.
JIMPOCHEM CO., LTD was established in 2010 and is headquartered in the Chemical Industry Park of Jinan City, Shandong Province. Covering an area of over 500 acres, JIMPOCHEM is a professional chemical raw material manufacturer integrating research and development, synthesis, large-scale production, sales, and specialized technical services. Our core focus centers on high-end fine chemicals, fluorine compounds, and cosmetic raw materials.
Having obtained ISO 9001 Quality Management System Certification and ISO 14001 Environmental System Certification, we are dedicated to providing high-purity chemical products and one-stop procurement solutions to global engineering and manufacturing enterprises.
Leveraging direct raw material channels and strategic partnerships with top global fluorochemical suppliers, our Jinan manufacturing base utilizes automated, digitally managed continuous distillation columns. This ensures infinite order scalability, batch-to-batch consistency, and rapid order fulfillment.
Under the standard "Quality is the Lifeline of the Enterprise," every batch of CAS HFE-7200 undergoes rigorous Gas Chromatography-Mass Spectrometry (GC-MS), Karl Fischer moisture titration (<10 ppm), and non-volatile residue analysis. Full batch traceability is guaranteed via unique batch QR codes.
Supporting the global dual-carbon transition, JIMPOCHEM employs low-emission synthetic routes, closed-loop solvent recycling, and advanced VOC abatement technology. Our fluorine chemical production line operates with zero ozone depletion protocols and full environmental compliance.
Navigating global chemical safety regulations requires absolute compliance transparency. When sourcing CAS HFE-7200 from JIMPOCHEM, international buyers receive comprehensive regulatory dossiers, including REACH registration (EU), TSCA compliance (USA), K-REACH (Korea), and METI inventory listings (Japan).
Needs specialized boiling point modifications, anti-static additives, or co-solvent blends? JIMPOCHEM’s R&D laboratory provides custom fluoro-ether blending tailored to your exact equipment specifications.
Corporate Vision: To become a leading global provider of chemical solutions, leading technological innovation and green development across high-tech industries.
As global environmental regulations evolve regarding per- and polyfluoroalkyl substances (PFAS), HFE-7200 stands out as a non-persistent hydrofluoroether alternative.
Unlike legacy PFCs with atmospheric lifetimes exceeding 2,000 years, HFE-7200 features an atmospheric lifetime of only 0.8 years. Its ethyl ether linkage (C-O-C) reacts rapidly with tropospheric hydroxyl radicals (OH), preventing atmospheric accumulation while remaining non-flammable.
With universal PFAS restrictions under review by ECHA (Europe) and US EPA, HFE-7200 provides a viable transition pathway for high-tech manufacturing, maintaining high dielectric performance while adhering to evolving environmental governance.
JIMPOCHEM actively partners with vapor degreaser OEMs to design closed-loop reclamation protocols, enabling industrial facilities to recover and re-distill 98%+ of HFE-7200 on-site, dramatically lowering total operational costs.
Explore JIMPOCHEM’s state-of-the-art Jinan manufacturing complex, automated distillation columns, R&D testing labs, and global packing centers.
In-depth technical answers curated for procurement directors, process engineers, and compliance officers.
JIMPOCHEM manufactures CAS HFE-7200 to an ultra-high chemical purity of ≥ 99.5% (combined isomer total: Ethyl Nonafluorobutyl Ether CAS 163702-05-4 and Ethyl Nonafluoroisobutyl Ether CAS 163702-06-5). We maintain moisture content below 10 ppm and non-volatile residue (NVR) under 1.0 ppm, suitable for semiconductor wafer rinsing and electronics cooling.
Yes, HFE-7200 exhibits exceptional material compatibility with most engineering plastics (PTFE, PEEK, POM, PE, PP) and elastomers (FKM, EPDM, Silicone, Neoprene). It does not cause swell or embrittlement under standard operating temperatures up to 76°C, making it an ideal drop-in replacement for legacy solvents like chlorofluorocarbons or chlorinated hydrocarbons.
While both are high-performance hydrofluoroethers, HFE-7200 has a higher boiling point (76°C) compared to HFE-7100 (61°C). This higher boiling point allows for more energetic thermal cleaning action in vapor degreasers, higher solvency for heavy waxes or high-viscosity synthetic oils, and reduced evaporative losses in high-ambient temperature operating environments.
No. Under standard DOT, IATA, and IMDG shipping regulations, HFE-7200 is classified as a non-flammable, non-hazardous liquid fluid with no flash point (according to ASTM D93 closed-cup testing). This lowers international logistics costs and simplifies warehouse safety storage compliance.
JIMPOCHEM supports both pilot R&D test orders starting from 20kg sample drums as well as full container loads (FCL) of 200kg drums or ISO tanks. Standard stock leads times are within 5-7 business days for global dispatch from our Jinan manufacturing hub.
Explore our full range of Daily Chemicals, Organic Intermediates, Health Care Materials, and Specialized Fluorine Compounds.
Select from our verified chemical catalog for fast international shipping, door-to-door logistics, and complete COA certification.
JIMPOCHEM
